DRI-Polisher
The Dri Polisher is designed to be used as a polishing tumbler to finish parts to a high luster.
- DRI-POLISHER
- Comes in 115V
- 10" bowl capacity is .12 cubic feet
- Polish/finish parts to a high luster
- Do not operate with wet media
- Cycle time is 3-8 hours
- Includes free DRI-SHINE III
- CE CERTIFIED
- Rated Horsepower: 115v-0.07 and 230v-0.05
CLICK HERE FOR REPLACEMENT PARTS FOR DRI POLISHER
Please be certain you have selected the correct voltage for your location. United States typically uses 115V.
Dri-Polisher The DRI SHINE lll is a universal fast acting dry polish for brass, silver, copper, titanium, stainless steel and more. Clean to use. Formulation has a corn cob base with pointed irregular particles. The Dri-Polisher features a 10-inch diameter bowl with a capacity of .12 cubic feet. All Dri-Polishers come with a free charge of Dri-Shine III, a Raytech exclusive universal polishing media. Shipping weight 9 pounds, Shipping Volume 1.05 Cubic feet , 11 x 11 x 14”
- The Dri Polisher is designed to be used as a polishing tumbler to finish parts to a high luster.
- This unit cannot be operated wet. This machine can be operated with any dry media.
- Simply fill the bowl with media and place the parts inside.
- The Dri Polisher is provided with a lid that can be used during the process time or can be operated without, on/off switch supplied. Typical cycle time : 3-8 hours.
- Longer cycles will not harm parts but will only enhance the luster.

Part Number | 23012R (115v) |
---|---|
Motor | 115v 60Hz 0.9 Amps Wattage Power 50W |
Best Use | Polishing tumbler used to finish parts to a high luster. |
Helpful Hint | Cannot be operated wet. Use only dry media |
Unit Weight | 9 Lbs |
Pack Carton Size | 1.05 cubic feet |
Box Measurements | 11 x 11 x 14” |
Bowl Capacity Size | .12 Cubic Feet |
Bowl Diameter | 10 inches |
Bowl Height To Lid | 5 Inches |
Bowl Width To Shaft | 5 Inches |