As low as $83.95
  • Ceramalite
  • Clean running light media offers a finer finish than ceramic media
  • Made of ceramic & plastic blend
  • Use on heavy dense pieces
  • Offers fast & bright finish than plastic media
  • V Cut or Angle Cut Cyclinders
  • Use with Raytech Compound B Solution
  • Non abrasive media for light deburring and polishing
  • Suitable for small burr removal
  • For use on soft metals like brass and aluminum
Categories: , ,
In stock

Clean running light media that is between a ceramic and plastic bond. Best used on heavy and dense workpieces. Finishing metal objects with Ceramalite is not as fast as with a ceramic media but is faster than using a plastic media. Finish is finer than ceramic but brighter than standard opaque finish produced by plastic media. Provides faster finish than ceramic media and a brighter/faster finish than plastic media on metals.

CE Shipping Weight: 22 pounds, 2.13 cubic feet

  • Why use Finishing Media
  • Deburring and Polishing
  • Improve surface finish texture
  • Remove scaling
  • Using media keeps parts from hitting each other
  • Media carries Compound Solution to coat parts during tumbling   


SHAPE BENEFITS V Cut Cylinders …This shape excels in its ability to penetrate and it has extreme mobility. All media's are geometric in shape and this usually means that center of gravity is located at the center of each media piece. However, center of gravity falls on the outside edge of the 'V' cut shape. For this reason, it is the best general or universal shape to use when in doubt about which media to use. Angle Cut cylinders are used to improve finish and better reach area recesses , holes, and crevices. Best used on concave surfaces , rounded areas and inner hole deburring. Less likely to get stuck in holes/recessed areas


WARNING: This product can expose you to lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov

Banner Product