Tumble Dump 40
Descaling Metal Castings
- Tumble Dump 40
- Comes in 115V (Domestic) & 230V (International)
- 17 " bowl capacity is .35 cubic feet
- Inlet/outlet port for rinsing systems
- Designed for heavy duty use to deburr or polish
- Features tumble dump tilting plate w/adjustable amplitude
- Has drain
- Features adjustable amplitude
- Rated Horsepower: 115v - 0.38 and 230V - 0.31
CLICK HERE FOR REPLACEMENT PARTS FOR TD-40
Please be certain you have selected the correct voltage for your location. United States typically uses 115V.
These models incorporate all the features of the Adjusta-Vibe models with one addition: Raytech’s patented Tumble-Dump tilting plate. Discharge port on TD-75DC only.
Deburring metal stampings and machined parts. Descaling metal castings, cutting radii on sharp edges of metal parts, and polishing metal and plastic parts.
Shipping weights and volumes are as follows:
TD-40, 56 pounds, 5.06 cubic feet, 18” x 27” x 18”;
TD-75 & TD-75DC, 73 pounds, 9.18 cubic feet, 23” x 30” x 23”.
Raytechs’s Tumble Dump models feature a built-in hinge system that allows the parts and media to be easily removed from the machine. This saves time and money by eliminating the tedious task of unloading and separating by hand.
WARNING: This product can expose you to lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov
| Part Number | 23031r |
|---|---|
| Motor | 115v 60Hz 2.5 Amps Wattage Power 287W / 230v is 50Hz 1.0 Amps Wattage Power 220W Noise Level 82db |
| Best Use | Deburring metal stampings and machined parts |
| Helpful Hint | See Tech Notes |
| Unit Weight | 56 Lbs |
| Pack Carton Size | 5.06 cubic feet |
| Box Measurements | 18” x 27” x 18” |
| Bowl Capacity Size | .35 cubic feet |
| Bowl Diameter | 17 Inches |
| Bowl Height To Lid | 7 Inches |
| Bowl Width To Shaft | 4.25 Inches |
