Descaling metal castings, cutting radii on sharp edges of metal parts, polishing metal and plastic parts.
- Tumble Dump 75
- Comes in 115V (Domestic) & 230V (International)
- 21 " bowl capacity is .75 cubic feet
- Large size offers increased productivity
- Designed for heavy duty use to deburr or polish
- Features tumble dump tilting plate w/adjustable amplitude
- Has a drain
- Features adjustable amplitude
- Rated Horsepower: 115v - 0.38 and 230v - 0.31
Please be certain you have selected the correct voltage for your location. United States typically uses 115V.
Tumble-Dump™ 40, 75 & 75 DC
These models incorporate all the features of the Adjusta-Vibe models with one addition: Raytech’s patented Tumble-Dump tilting plate. Discharge port on TD-75DC only.
Shipping weights and volumes are as follows:
TD-40, 56 pounds, 5.06 cubic feet, 18” x 27” x 18”;
TD-75 & TD-75DC, 73 pounds, 9.18 cubic feet, 23” x 30” x 23”.
Tumble Dump Feature
Raytechs’s Tumble Dump models feature a built-in hinge system that allows the parts and media to be easily removed from the machine. This saves time and money by eliminating the tedious task of unloading and separating by hand.
WARNING: This product can expose you to lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov
|Part Number||23044r, 24122r|
|Motor||115v 60Hz 2.5Amps 287W / 230v 50Hz 1.0 Amps 220W|
|Best Use||Deburring metal stampings and machined parts|
|Helpful Hint||See Tech Tips|
|Unit Weight||73 lbs|
|Pack Carton Size||9.18 cubic feet|
|Box Measurements||23” x 30” x 23”|
|Bowl Capacity Size||.75 cubic feet|
|Bowl Diameter||21 Inches|
|Bowl Height To Lid||9.5 Inches|
|Bowl Width To Shaft||7 Inches|