Very Fine Cut Pyramids
- Plastic media , usually has a polyester base, and is generally used for softer metals such as aluminum, brass and zinc workpieces. It will produce a very smooth finish , but very little shine. Plastic media is excellent when preparing the workpiece for anodizing. Plastic media does not discolor metal and does not peen over burrs. It is generally 30% lighter than ceramic media. Use for general metal removal, pre-paint or pre-plate finishing polishing.
Density: 55 lbs/cu ft
WARNING: This product can expose you to lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov
|liquid volume||5 oz|
|porcelain balls||1mm 5 lbs|