9/16 XF Cones
Formulated for very fine surface conditioning, low RMS finishes are commonly achieved. Plastic medias are widely used in the precision metal industries. Also due to the fine surface finishes achieved, parts are prepared for pre-plate, pre-anodize, or decorative polishing.
Brown, V-Cut, Cone (medium cut), Green (light cut), and White (very fine cut).
Density: 55 lbs/cu ft
- Plastic media , usually has a polyester base, and is generally used for softer metals such as aluminum, brass and zinc workpieces. It will produce a very smooth finish , but very little shine. Plastic media is excellent when preparing the workpiece for anodizing. Plastic media does not discolor metal and does not peen over burrs. It is generally 30% lighter than ceramic media. Use for general metal removal, pre-paint or pre-plate finishing polishing.
WARNING: This product can expose you to lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov
|liquid volume||5 oz|
|porcelain balls||1mm 5 lbs|