Polishing metal and plastic parts
- Designed for heavy duty use to deburr or polish
- Adjustable amplitude
- Discharge port
- Has a drain
- AV-SS version designed for use with steel media
- Comes in 115V (Domestic) & 230V (International)
- 17" bowl capacity is .35 cubic ft.
- Rated Horsepower: 115v - 0.38 and 230v - 0.31
CLICK HERE FOR REPLACEMENT PARTS FOR AV-40SS
Please be certain you have selected the correct voltage for your location. United States typically uses 115V.
The Adjusta-Vibe 40ss is specifically designed for use where steel or stainless-steel media processing is required although all medias can be used. The AV-40SS has all the features of the AV-40 and in addition, its 17-inch bowl is equipped with a discharge port for easier unloading. Steel or S/S media capacity is 100 pounds. Used to Debur metal stampings and machined parts, descaling metal castings, cutting radii on sharp edges of metal parts, and polishing metal and plastic parts.
Shipping weight 51 pounds; shipping volume 5.06 cubic feet, 18” x 27” x 18”
The working capacity of the Adjusta-Vibe 40 and 40SS is .35 cubic feet, or three gallons. The working capacity of the model 75 is .75 cubic feet, or approximately 6 gallons. This capacity includes both the media and the workpieces. The general rule of thumb is 70% media and 30% parts.
WARNING: This product can expose you to lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov
|Part Number||23027R and 24116R|
|Motor||115v 60Hz 2.5 Amps Wattage Power 287W / 230v is 50Hz 1.0 Amps Wattage Power 220W Noise Level 82db|
|Best Use||Deburring metal stampings and machined parts|
|Helpful Hint||See tech notes|
|Unit Weight||51 lbs|
|Pack Carton Size||5.06 cubic feet|
|Box Measurements||18” x 27” x 18”|
|Bowl Capacity Size||Steel or S/S media capacity is 100 pounds|
|Bowl Diameter||17 inches|
|Bowl Height To Lid||7 Inches|
|Bowl Width To Shaft||4.25 Inches|