Adjusta-Vibe 25SS

Deburring/Descaling metal, and plastic machined parts

Adjusta-Vibe 25SS

As low as $824.95
  • AV-25 (SS)
  • Comes in 115V & 230V
  • 14 " bowl capacity is .22 cubic feet
  • Has a discharge port
  • Has a drain
  • Designed for heavy duty use to deburr or polish
  • Features adjustable amplitude
  • Comes in AV-SS version designed for use with steel media
  • Deburring metal stampings and machined parts
  • Descaling metal castings
  • Cutting radii on sharp edges of metal parts
  • Polishing metal and plastic parts
  • Noise Level 82db
  • Rated Horsepower: 115v - 0.19 and 230v - 0.18

Replacement parts may be ordered or you may contact Customer Service for a factory repair quote and RMA number

CLICK HERE FOR REPLACEMENT PARTS FOR AV-25SS

Categories: ,
In stock
SKU
AdjustaVibe25SS

Adjusta-Vibe 25SS

This machine is specifically designed for use where steel or stainless-steel media processing is required although all medias can be used. It is designed with a heavy-duty drive and suspension system and has adjustable amplitude. The 14-inch bowl has a discharge port for easier unloading and a capacity of .22 cubic feet.

Steel or S/S media capacity is 50 pounds

Shipping weight 23 pounds; shipping volume 2.13 cubic feet, 15” x 18” x 15”.

 

TECH TIP : Adjusta-Vibe Amplitude Adjustment

The amplitude (the amount of movement of the bowl) determines the force with which the tumbling media will act upon the workpieces. The greater the amplitude, the more aggressive the tumbling action will be. The Adjusta-Vibe makes it possible to adjust the amplitude of the tumbler to match the job to be done. The adjustable weight system will produce a tumbling action that ranges from mild to aggressive

Before
After




WARNING: This product can expose you to lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov

More Information
Part Number 23019r 24112r
Motor 115v 60Hz 1.7 Amps 120W /// 230v 50Hz 0.8 Amps 120W
Best Use Deburring metal machined parts
Helpful Hint Features Adjustable Amplitude
Unit Weight 23 lbs
Pack Carton Size 2.13 cubic feet
Box Measurements 15” x 18” x 15”.
Bowl Capacity Size .22 cubic feet
Bowl Diameter 14 Inches
Bowl Height To Lid 5 Inches
Bowl Width To Shaft 4 Inches

Banner Product