Adjusta-Vibe 40
Deburring/Descaling Metal and plastic castings.
- Adjusta-Vibe 40
- Comes in 115V (Domestic) & 230V (International)
- 17 " bowl capacity is .35 cubic feet
- Has a drain
- Designed for heavy duty use to deburr or polish
- Features adjustable amplitude Calibri (Body)
- Rated Horsepower: 115v - 0.38 and 230v - 0.31
CLICK HERE FOR REPLACEMENT PARTS FOR AV-40
Please be certain you have selected the correct voltage for your location. United States typically uses 115V.
Adjusta-Vibe 40
Model 40 vibratory machines are compact, yet have a capacity of .35 cubic feet and are equipped with amplitude adjustment, inlet and outlet ports for compound rinsing systems and heavy duty cross-linked 17-inch polyethylene bowl. Noise reducing lids are standard. When steel burnishing is required, use Model AV-40SS. Can use dry or wet media. Noise level 82db.
Shipping weight 51 pounds; shipping volume 5.06 cubic feet, 18” x 27” x 18”.
The working capacity of the Adjusta-Vibe 40 and 40SS is .35 cubic feet, or three gallons.
The working capacity of the model 75 is .75 cubic feet, or approximately 6 gallons.
This capacity includes both the media and the workpieces.
The general rule of thumb is 70% media and 30% parts.
Deburring metal stampings and machined parts.
Descaling metal castings.
Cutting radii on sharp edge of metal parts.
Polishing metal and plastic parts.
WARNING: This product can expose you to lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov
Part Number | 23026R and 24114R |
---|---|
Motor | 115v 60Hz 2.5 Amps 287W /// 230v 50Hz 1.0 Amps 220W |
Best Use | Deburring metal castings |
Helpful Hint | See PDF instructions |
Unit Weight | 51 lbs |
Pack Carton Size | 5.06 cubic feet |
Box Measurements | 18” x 27” x 18”. |
Bowl Capacity Size | .35 cubic feet |
Bowl Diameter | 17 inches |
Bowl Height To Lid | 7 Inches |
Bowl Width To Shaft | 4.25 Inches |