9/16 XF Cones

9/16 XF Cones

As low as $169.95
  • Plastic
  • Use for very fine surface conditioning
  • Often used in precision metals industry 
  • Use on soft metals , copper, brass, alum
  • Offers smooth finish but little shine
  • 9/16” XF Cones
  • Use with Raytech Compound B Solution
Categories: , ,
In stock
SKU
XFCones

Plastic

Formulated for very fine surface conditioning, low RMS finishes are commonly achieved. Plastic medias are widely used in the precision metal industries. Also due to the fine surface finishes achieved, parts are prepared for pre-plate, pre-anodize, or decorative polishing.

Brown, V-Cut, Cone (medium cut), Green (light cut), and White (very fine cut).

Density:  55 lbs/cu ft

Tech Tips
  • Plastic media , usually has a polyester base, and is generally used for softer metals such as aluminum, brass and zinc workpieces. It will produce a very smooth finish , but very little shine. Plastic media is excellent when preparing the workpiece for anodizing. Plastic media does not discolor metal and does not peen over burrs. It is generally 30% lighter than ceramic media. Use for general metal removal, pre-paint or pre-plate finishing polishing. 
Before
After



WARNING: This product can expose you to lead, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.p65warnings.ca.gov

More Information
Ceramalite 5/8" V Cut Cylinders 20 lbs

Banner Product