Twin Tumbler 115v
1200 Tumbler comes with:
- Tumbler Base with 6' 115 VAC Power cord
- One 2 1/2 lb bag of green pyramid cutting media
- One 2 lb bag of corncob Dri Shine media
- One 8" Wet/Dry Tumbler bowl and lid assembly
- One 10" Dry Tumbler Bowl and Lid Assembly
- Rubberized bowl and lid retaining nut
- Instructions
- CE CERTIFIED
- Rated Horsepower: 115v - 0.07
Your 1200 Twin Standard Raytech Vibratory Tumbler has been supplied with 2 bowl and lid assemblies. The smaller bowl is used for Wet Green Cutting Media and DryShine® Media. The larger 10” bowl is used for the final dry polishing operation with the DryShine® media. To impart a highly reflective shine to the tumbled parts proceed next to the DryShine® Media. Use separate bowl for the polishing for the 1200 and 2500 Standard Vibratory Tumblers. There is no need to add any water or polishes as this media is already treated with a polish. DryShine® Media should be tumbled with the parts for at least 6 hours. Tumbling for longer periods will yield a higher shine. Remember to use a ratio of 70% Media to 30% Parts. This dry media will not remove an appreciable amount of material
- Removes rust from metal without losing detail or rounded edges
- Removes burrs from hardware stampings
- Polishing difficult to reach surfaces to a high shine
- Use 1200 tumbler for parts up to 3” long
- Use 2500 tumbler for parts up to 5-6” long

Part Number | 23007R |
---|---|
Motor | 115v 60Hz 1.1 amps 50W |
Best Use | Removes rust from metal . Removes burrs from stampings and hardware. |
Helpful Hint | Use with wet or dry media |
Unit Weight | 13 lbs |
Pack Carton Size | 1.3 cubic feet |
Box Measurements | 13 x 11 x 16 |
Bowl Capacity Size | .05 cubic feet or 3 lbs of media |
Bowl Diameter | 8 Inches |
Bowl Height To Lid | 3.75 Inches |
Bowl Width To Shaft | 4 Inches |