Pro Mag Kit 115v
2500 Tumbler comes with:
- Heavy Duty Wet/Dry Media Tumbler Base With 6' 115V Power Cord
- Two 12" Wet/Dry Bowls one with solid lid, one sifter lid
- One 8 lb container of Green Pyramid Cutting Media
- One 5 lb container Dri Shine Media
- Instructions
- CE CERTIFIED
- Rated Horsepower 115v - 0.07
Your 2500 Twin Vibratory Tumbler has been supplied with 2 general purpose 12” bowls used for wet or dry polishing operations with the Green Cutting Media and DryShine® Media. To impart a highly reflective shine to the tumbled parts proceed next to the DryShine® Media. Use separate bowl for the polishing for the 1200 and 2500 Standard Vibratory Tumblers. There is no need to add any water or polishes as this media is already treated with a polish. DryShine® Media should be tumbled with the parts for at least 6 hours. Tumbling for longer periods will yield a higher shine. Remember to use a ratio of 70% Media to 30% Parts. This dry media will not remove an appreciable amount of material.
- Removes rust from metal without losing detail or rounde edges
- Removes burrs from hardware stampings
- Polishing difficult to reach surfaces to a high shine
- Use 1200 tumbler for parts up to 3 " long
- Use 2500 tumbler for parts up to 5-6" long

Part Number | 23124R |
---|---|
Motor | 2500 TWIN 115 v 60Hz 50W 1.1 Amps |
Best Use | Use with wet or dry media |
Helpful Hint | Holds parts up to 6" long |
Unit Weight | 22 lbs |
Pack Carton Size | 2.9 cubic feet |
Box Measurements | 26 x 13 x 15 |
Bowl Capacity Size | .18 cubic feet / 11 lbs of media |
Bowl Diameter | 12 Inches |
Bowl Height To Lid | 4.25 Inches |
Bowl Width To Shaft | 4 Inches |